Audio Bauer Pro - Onlineshop

0

No products

  • Shipping

    CHF 0.00
  • Total

    CHF 0.00
Home > Sound Devices>Recorders>Sound Devices MixPre-10T

Sound Devices>Recorders>Sound Devices MixPre-10T

Home > Sound Devices>Recorders>Sound Devices MixPre-10T

Sound Devices>Recorders>Sound Devices MixPre-10T

Sound Devices MixPre-10T

10-input, 12-track audio recorder, mixer and USB audio interface, built-in timecode

+FREE OF CHARGE Voice Technologies VT506Mobile

Ask for the current currency discount!        

Reference: 003249

2 Items in stock

CHF 2'199.00

Quantity:

The World's Smallest 10-Input/12-Track Recorder

The MixPre-10T is the newest member of the groundbreaking MixPre Series of recorders, mixers, and USB audio interfaces. This lightweight, 10-input/12-track recorder offers world-class sound quality, flexible powering, and built-in, highly accurate timecode generator/reader – perfect for production sound mixers, field recordists and sound designers.

Exceptional Audio Quality

The MixPre-10T features eight Sound Devices' Kashmir™ microphone preamps. These high-performance, ultra-low-noise, discrete, Class-A mic preamps were handcrafted by Sound Devices. The Kashmir mic preamps feature a -130dBV noise floor, analog limiters, and new 32-bit A-to-D converters to ensure the highest quality audio recordings that far surpass those of other recorders using simple off-the-shelf, IC-based mic preamps.
Accurate Timecode Generator/Reader Plus Word Clock

As its name suggests, the MixPre-10T features a built-in, ultra-high accuracy timecode generator and reader. Even when turned off or all power is removed, the MixPre-10T continues to hold accurate timecode for hours, more than long enough even for the most extended lunch break (or break in production)! With its BNC, Aux, and HDMI timecode connections, all common frame rates and timecode modes are supported as well as the ability to lock to or output word clock, ideal for synchronization in any digital audio environment.

Flexible Powering

For the ultimate in portability and convenience, the MixPre-10T has multiple powering options. The MixPre-10T features locking 4-pin Hirose connector (10-18V) for either external battery powering or AC-powering (with optional AC adapter). Like the MixPre-3 & MixPre-6, the MixPre-10T can also be powered from AA batteries in a convenient detachable sled of eight cells, or via an optional sled that offers powering from up to two hot-swappable Sony L-Mount Li-Ion batteries.

Versatile I/O Routing

The MixPre-10T offers eight XLR/TRS combo Mic/Line level inputs, and a 3.5mm Aux/Mic input, which can also be used for 2-channel line input, camera return or timecode.The MixPre-10T also provides comprehensive routing flexibility with its two TA3 balanced outputs and a 3.5mm Stereo output, each with routing matrix.

Auto Copy

The MixPre-10T’s auto copy feature is as easy as ABC - or what we like to call “Auto-Background Copying”. With this feature, users can record files up to 192kHz / 24-bit to an SD card, while automatically copying to a USB thumbdrive (USB A) for handoff to a client or as a backup copy.

Compact, Unintimidating Design
The size and weight of the MixPre-10T will fit any production environment. It features a responsive capacitive touch screen for incredibly simple and intuitive operation, and a bright, IPS sunlight-readable color LCD for the ultimate in convenient navigation. The MixPre-10T also provides a transport joystick for starting record or playback, and two user-programmable shortcuts allowing user customization.
Like all Sound Devices products, the MixPre-10T is extremely durable. Constructed with a die-cast aluminum chassis, it is both lightweight and incredibly robust. The ultra-compact MixPre-10T is perfect for jobs on the run.

Mixing, Metering and Monitoring

The MixPre-10T incorporates a simple mixer that offers gain control knobs, and access to panning and soloing via a simple press of the knob. For metering, it provides easy-to-read ring LEDs with limiter activity, along with three LCD views for multitrack, mix, and USB return metering.The MixPre also includes a 3.5mm jack for headphone monitoring with user-programmable routing presets from our custom-designed, powerful, wide-bandwidth headphone amp.

Flexible Wireless Control and Workflow

The MixPre features integrated Bluetooth Smart® for easy wireless connection, control and metering via the free Sound Devices Wingman app on iOS and Android devices. What’s more, the MixPre-10T allows users to manage and create sound reports.

Intuitive Operation

Like its MixPre Series predecessors, the MixPre-10T’s user-friendly, touch-screen navigation features three modes of operation: Basic, Advanced, and Custom. Basic mode has been designed to allow a user to start recording right out of the box, and is intended for stereo recording applications, such as interviews and music recordings.Advanced and Custom mode offer more experienced audio users access to multi-channel recording and advanced settings such as metering, routing, timecode, mic pre gain, stereo and M/S channel linking, channel phase invert, input/output delay, headphone presets, and more.
Powerful USB Audio Interface
The versatile MixPre-10T makes an excellent USB audio interface featuring 12 channels in and 4 channels out from a computer at up to 96k sample rate. The Mixpre-10T also features the unique ability to record to an SD card while simultaneously audio streaming via USB.
Accessories

XL-WPH3, Power Supply (optional)

MX-8AA, Battery Sled (included)

MX-LMount, L-Mount Battery Sled (optional)

SAM-32SD, 32GB SD/HC-Card (optional)

XL-2, TA3-F to XLR-M male cable; 25-inch (optional)

(batteries not included) 

https://www.sounddevices.com

Frequency Response

10Hz to 80kHz +/- 0.5dB re 1kHz @ 192kHz sample rate

THD + Noise

0.005% max (@1kHz, 22-22kHz BW, gain=20dB, -10dBu in)

ADC

32 bit precision; 120dB dynamic range min (A-weighted, gain=10dB, fader=0dB)

Equivalent Input Noise

-130dBV (-128dBu) max (A-weighting, gain=76dB, 150 ohm source impedance)

Inputs

  • Mic: XLR active-balanced; 4k input Z 

  • Line: XLR active-balanced; 4k input Z

  • Aux/Mic in: 3.5mm TRS, 2-channel unbalanced; 100k input Z

  • Line: ¼-inch TRS active-balanced; 4k input Z

  • USB Audio: 4 channels

  • All inputs fully RF-filtered and overload protected.

Gain

  • Mic input: +6dB to +76dB 

  • Line input: -20dB to +30dB

  • Fader: -inf to +20dB

  • Headphone: -inf to +20dB

  • Total, Mic-to-recording (max): +96dB

  • Aux In (Mic): Gain = +10dB to +40dB

  • Aux In (Line): Gain = -10dB to +20dB

  • Total Aux Gain including Fader (Mic-to-recording): +60dB

Maximum Input Level

  • Mic XLR: +14dBu (limiters on or off) 

  • Line XLR/¼-inch: +28dBu (limiters on or off)

  • Aux In (Mic): -10dBu

  • Aux In (Line): +10dBu

Low Cut Filters

40Hz to 160Hz (adjustable), 18 dB/oct. First stage analog, subsequent stages digital.

Microphone Powering

  • Mic XLRs: 48V via 6.8k resistors, 10mA each 

  • Mic 3.5mm: 3V @ 3k source Z

Limiters

Limiter at all gain stages, range > 40dB. First stage analog, subsequent stages digital.

DAC feeding Stereo Out, Headphone Out

32 bit precision; 115dB dynamic range (A-weighted)

L/R Out

TA3 2-channel balanced, 1.1K max output impedance, +7.8dBu max output level

X1/X2 Out

3.5mm TRS stereo unbalanced, 500 ohm output Z, +7.8dBu max output level

Headphones Out

3.5mm TRS stereo unbalanced, for use with any impedance headphones

USB

  • Audio Interface (USB-C): 12-in/4-out; 44.1 to 96 kHz; 16/24-bit; Class-compliant USB 2.0 high speed or ASIO (supplied)

  • Mass Storage (USB-C): USB 2.0 high speed

  • Keyboard (USB-A): Text entry and control

Maximum Record Tracks

12 Tracks: Stereo mix + 10 ISOs 

Sampling Frequency

  • 44.1 kHz

  • 47.952 kHz

  • 48 kHz

  • 48.048 kHz

  • 96 kHz

  • 192 kHz

Bit Depth

16, 24

Recording Storage 

  • Type: SD, SDXC, SDHC Card

  • Max Storage Size: 512 GB (SDXC)

  • Card format: FAT32 (32GB or less) or exFAT (>32GB)

File Type

WAV (Broadcast Wave File Format) with embedded timecode stamp and metadata 

Timecode Modes

  • Free Run

  • Time of Day (file stamped w/current ToD)

  • Rec Run

  • Ext LTC (file stamped w/incoming LTC on BNC or Aux 3.5mm)

  • HDMI TC (file stamped w/incoming TC from cameras that output TC over HDMI

Timecode Frame Rates:

  • Auto-detects (fps): 23.98 (same as 23.976)

  • 24

  • 25

  • 29.97DF

  • 29.97ND

  • 30

  • 30DF

Sync Source

Internal, Word Clock, Ext LTC

BNC In (TC In)

Switchable between Timecode (default) or Word Clock Input

  • Timecode: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3 dBu)

  • Word Clock: 10k ohm impedance, 1.5V p-p

BNC Out (TC Out)

Switchable between Timecode (default) or Word Clock Output

  • Timecode: 1k ohm impedance, 3.0V p-p (+12 dBu)

  • Word Clock: 75 ohm impedance, 5V p-p

Remote Control 

  • Bluetooth Smart: Wireless control using Wingman app

  • HDMI (micro): Auto-record start/stop trigger from cameras that output record flag over HDMI

  • Timecode: Auto-record start/stop trigger via Aux In timecode

Touch Screen

320x256; 1.6-inch, color, sunlight-viewable IPS LCD

Power

  • AA Batteries: 8x AA sled (included). NiMH recommended

  • L-Mount: Optional sled for 2x (hot-swappable) Li-ion batteries 

  • AC Adapter: XL-WPH3: Universal, 45 W in-line AC-to-DC power supply Hirose 4-pin DC plug, with detachable IEC power cord. 100-240, 50/60Hz

Environmental

  • Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing) 

  • Storage: -40°C to 85°C 

Dimensions and Weight

  • Dimensions: 36 mm x 206 mm x 175 mm (H x W x D); 1.375” x 8.125” x 6.875”

  • Weight: .91 kg; 32.1 oz. (unpackaged, without batteries) 

specifications are subject to change without prior notice.

5 other products in the same category:

Sound Devices MixPre-6
CHF 1'199.00
Sound Devices MixPre-3
CHF 799.00
Sound Devices 788T-SSD
CHF 7'979.00
Sound Devices 702T
CHF 3'449.00
Sound Devices 970
CHF 5'599.00

Customers who bought this product also bought: